Welcome Guest [Log In] [Register]
We hope you enjoy your visit.


You're currently viewing our forum as a guest. This means you are limited to certain areas of the board and there are some features you can't use. If you join our community, you'll be able to access member-only sections, and use many member-only features such as customizing your profile, sending personal messages, and voting in polls. Registration is simple, fast, and completely free.


Join our community!


If you're already a member please log in to your account to access all of our features:

Username:   Password:
Add Reply
Motor and ESC Brushless Question
Topic Started: Mar 19 2008, 06:44 AM (1,028 Views)
Headshok88
Member Avatar
Disproportioned Malcontent
[ *  *  *  *  *  *  * ]
I have a Holmes Crawlmaster Sport and a Mamba Max. The issue is on start-up and under a load the motor will stall or jitter. What seeting should I be running on the Mamba Max? Any of you guys running this set up?

I am using 3 cell LiPo with this set-up too.
-HeadShok88

PPE
Porter Performance Engineering
Custom R/C Parts & 3D Computer Design Services.

Posted Image
Offline Profile Quote Post Goto Top
 
Itch
NOSTR Newbie
[ *  * ]
I would put your punch control to 0% or disabled, and do "low" start power. Give that a shot.
The Itch
Offline Profile Quote Post Goto Top
 
Headshok88
Member Avatar
Disproportioned Malcontent
[ *  *  *  *  *  *  * ]
I have the punch set to 0% but I am running medium on start power, I will drop it down and see if that helps.
-HeadShok88

PPE
Porter Performance Engineering
Custom R/C Parts & 3D Computer Design Services.

Posted Image
Offline Profile Quote Post Goto Top
 
NickRummy
Member Avatar
NOSTR Photographer & Styrene Pimp
[ *  *  *  *  *  *  *  *  *  *  *  * ]
Isn't there a timing option too? That should be on normal or lower correct?
Offline Profile Quote Post Goto Top
 
Old Busted Hotness
Member Avatar
I <3 moss
[ *  *  *  *  *  *  * ]
Punch control disabled, start power Highest, timing low or normal. Expect breakage.
Posted Image

Run what ya brung, unless it's your mouth.

MSD Team Driver
Offline Profile Quote Post Goto Top
 
Headshok88
Member Avatar
Disproportioned Malcontent
[ *  *  *  *  *  *  * ]
I found part of the problem. I didn't notice the can of the outrunner was rubbing on the tranny mount on the AX-10. shimmed the tranny up a hair and that helped a bunch! I am still running at low start power. I will bump it up and see what that does.
-HeadShok88

PPE
Porter Performance Engineering
Custom R/C Parts & 3D Computer Design Services.

Posted Image
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Radios and Electronics · Next Topic »
Add Reply